9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
BEFORE CONNECTING TO THE ELECTRICAL SUPPLY
CHOOSING THE RIGHT BLADE
NOTE:
As a rule, select narrow blades for intricate curve cutting and
wide blades for straight and large curve cutting.
Scroll saw blades wear out and must be replaced frequently for optimum
cutting results.
Scroll saw blades generally become dull after 1/2 hour to 2 hours of cutting,
depending on the type of material and speed of operation.
Best results are achieved with pieces less than one inch (25 mm) thick.
When cutting workpieces thicker than one inch (25 mm), you must guide the
blade into the workpiece very slowly and take extra care not to bend or twist
the blade while cutting.
PINLESS BLADE ADAPTOR
The pinless blade adaptor allows you to use blades that don't have locating
pins at each end of the blade.
1. Adjust one set screw on each
adaptor until it covers
approximately half the hole when
viewed from above
2. Loosen the other set screw just
enough to slide an adaptor onto
each end of the blade.
Summary of Contents for CSS16VB
Page 20: ......
