7
OPERATION
Assemble the tool as described previously.
Holding the tool firmly, and ensuring your fingers are
well away from the rotating parts, plug into the mains
and switch ON by pressing ‘I’ (A).
Adjust the speed according to the job in hand, by
turning the adjuster ‘B’, using the tables below for
reference.
To switch OFF, press ‘O’ (A).
CAUTION! NEVER put the tool down until it has
stopped completely.
DO NOT use force when using this tool; a light
pressure is all that is required.
REFERENCE TABLES
•
The following speeds are for guidance only.
2. Polishing Bob
Material
Speed
Steel
5
Aluminium, Brass
3
Plastic
5
1. Grinding Stones
Material
Speed
Stone, Shell
1
Steel
5
Aluminium, Brass
2
Plastic
1
