9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
POSITIONING THE FRONT HANDLE
The front handle can be positioned
left, right or centre as required.
1. Loosen the front handle by
twisting it clockwise (when viewed
from above).
2. Rotate the front handle to the
required position.
3. Secure the front handle by
twisting it anticlockwise (when
viewed from above).
USING/SETTING THE DEPTH STOP
The depth stop can be fitted to the
front handle as shown.
1. To install the depth stop, loosen
the support handle by turning it
anticlockwise.
2. Insert the depth stop rod through
the hole in the front handle and
set to the required depth,
adjusting the position of the
handle attachment if required.
3. Secure in place by re-tightening the front handle.
