7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
3. Connect the sandblasting gun to
the other end of the hose using a
suitable spanner to ensure an air-
tight seal. Ensure the inlet
connector is tightly fitted to the
gun.
• A spare gun closing block is
supplied for future use.
OPERATION
SAFETY AND HEALTH CONSIDERATIONS
• Before opening the tank make sure it is not pressurized. Ensure the
pressure gauge reads “0”. If it does not, release pressure from the
tank (See page 10).
• Disconnect the compressor before opening the tank. Protect
yourself and those around you from “over-spray”. Remember that
your sandblaster is shooting a powerful spray of abrasive material.
Do not point it at yourself or anyone around you.
• Wear protective clothing including protective hood and heavy
gloves when using this sandblaster.
• Wear a dust mask over your mouth when using this sandblaster. You
will create a cloud of abrasive material and debris which is
dangerous to inhale.
• Protect anything around you that may be damaged from the spray
of abrasive particles. Nothing subject to contamination damage or
with a fine surface should be near your sandblaster work area.
WARNING: ALWAYS WEAR YOUR HOOD, DUST MASK AND HEAVY DUTY
CANVAS GLOVES WHEN OPERATING THE SANDBLASTER.
WARNING: BEFORE OPERATING YOUR SANDBLASTER, INSPECT EACH
CONNECTION, DOUBLE CHECKING TO MAKE SURE THAT ALL ARE TIGHT
AND PROPERLY SEALED.
WARNING: THIS SANDBLASTER IS NOT INTENDED FOR USE WITH SILICA
BASED ABRASIVES. WHICH HAVE BEEN LINKED TO SEVERE RESPIRATORY
DISEASE. ALWAYS USE SILICA SUBSTITUTES (SUCH AS CLARKE GLASS BEAD
ABRASIVE.
Fig 7
Summary of Contents for CPSB100B
Page 16: ......