10
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
FORWARD / REVERSE SELECTION
1. Set the forward/reverse selector
switch to the position marked ‘R’
for normal ‘Right hand’ rotation.
2. Set the forward/reverse selector
switch to the right hand position
marked ‘L’ for ‘Left hand’ rotation.
NOTE: This should only be performed
when the drill is at a complete stop.
SPEED SELECTION
1. Set the high or low speed by
selecting one of the two gear
speeds (1-low or 2-high) with the
selector.
• Turn the speed selector knob until
the chosen number is aligned with
the arrow on the drill body).
NOTE: This should only be performed
when the drill is at a complete stop
.
• Variable speeds may be selected
by turning the speed control in the
centre of the trigger.
AUXILIARY HANDLE & DEPTH STOP
1. Fit the depth stop along with the
auxiliary handle.
• This can only be used if the handle
is installed.
2. Slide the handle assembly over the
chuck and onto the body of the
drill. Insert the depth stop rod into
the holder in the handle assembly,
rotate the handle to the desired
position and secure in position by
twisting the handle grip clockwise,
DO NOT overtighten.
• To set the depth stop, loosen the
handle by turning the handle grip
anticlockwise and slide the rod or
and out to the required position.
• The scale markings on the rod are
for reference only.
