9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
BEFORE USE
1. Remove the saw from the packaging carefully.
• The following items should be supplied. If anything is missing contact
your dealer.
BENCH MOUNTING
Holes are provided in all four feet to
facilitate bench mounting.
• Always mount your saw firmly
on a level surface to prevent
movement.
The saw can also be mounted to a
piece of 12.5 mm or thicker plywood
which can then be clamped to your
work bench or moved to other work
sites and re-clamped when required.
• When mounting your saw to a piece of plywood, make sure that the
mounting screws do not protrude from the bottom of the wood.
• If the saw rocks on the surface, place a thin piece of material under one
saw foot until the saw is firm on the mounting surface.
MITRE SAW STAND (
NOT SUPPLIED
)
You can also mount the mitre saw on
a purpose built stand available from
your Clarke dealer.
Cross-Cut Mitre Saw with Laser Guide
1 x Dust Collection Bag
1 x Work Clamp
2 x Hexagon Keys (4 mm & 6 mm)
250 mm Diameter 36 Tooth TCT Wood
Cutting Blade (fitted)
Summary of Contents for CMS250S
Page 28: ......
