11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
USING THE SANDING ATTACHMENT
SELECT THE CORRECT SANDING SHEET
The ‘grit’ of the sanding sheet is identified by a number on the rear of the
sheet. The lower numbers are more abrasive. (use lower grit for rough wood
and higher grit for finishing)
SANDING
1. Hold the tool tightly and move the
On/Off switch forward.
2. Put the tool on the workpiece.
3. Let the tool to do the work and do
not apply excessive pressure to
the sanding pad.
• Applying excessive pressure will
cause the sanding sheets to
wear out faster and can
damage the motor.
4. If sanding into corners, use the tip
or corner of the sanding pad.
• When sanding, the sanding sheet can heat up, you must let the sanding
sheet cool down regularly.
WARNING: ALWAYS WEAR EYE PROTECTION AND A DUST MASK.
Summary of Contents for CMFT300QR
Page 16: ......
