24
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
MAINTENANCE AND SERVICING
CLEANING
• Keep all safety devices, air vents and the motor housing free of dirt and
dust. Wipe the equipment with a clean cloth or blow it with compressed
air at low pressure (always wear PPE when using compressed air).
• We recommend that you clean the machine as soon as you have
finished using it.
• Do not use cleaning agents or solvents; these could attack the plastic
parts of the machine.
• Make sure that no water can seep into the machine. The ingress of
water into an electric tool increases the risk of an electric shock.
• Never spray water on the machine!
CUTTING BIT
• Resin must be cleaned off the cutting bits at regular intervals with an
appropriate resin remover.
STORAGE
• Store the bench top shaper and accessories out of children’s reach in a
dark and dry place at above freezing temperature. The ideal storage
temperature is between 5 and 30 °C.
• Store the bench top shaper in its original packaging.
• Cover the bench top shaper in order to protect it from dust and
moisture.
• Store the operating manual with the bench top shaper.
WARNING: BEFORE CARRYING OUT MAINTENANCE, MAKE SURE THAT THE
MACHINE IS DISCONNECTED FROM THE MAINS SUPPLY.
Summary of Contents for CBTSR
Page 28: ......
