16
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
USING THE MITRE GAUGE
The mitre gauge is inserted into the
table slot from either edge.
1. To set a mitre angle, loosen the
lock knob by turning it counter-
clockwise.
•
The mitre gauge can be turned to
max 60
o
in both directions.
2. Firmly tighten the knob to secure
the mitre gauge in position.
CONNECTING TO A DUST COLLECTOR
This bandsaw is fitted with a dust port
for connection to a dust collector if
available.
•
The connector size is 48 mm i/d
(53 mm o/d)
Other sawdust will fall into the dust
drawer which can be removed and
emptied as required. This is best
cleared out regularly.
