15
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
UPPER BLADE GUIDE ADJUSTMENT
The height of the upper blade guide
needs to be adjusted prior to every
cutting operation to accommodate
the height of the workpiece.
The upper blade guide should be set
approx 3 mm above the workpiece.
Set the upper blade guide by turning
the adjusting knob to the desired
height and securing in position with
the locking knob.
PREPARING FOR WORK
1. Press the green button to start the
bandsaw.
2. Press the red button ot stop the
machine at any time.
USING THE FENCE
The fence can be used on both sides of the blade.
1. Engage the fence with the table
and move to the required
position. The scale indicates the
distance from the saw blade to
the fence.
2. Ensure the fence is parallel with
the grooves in the table.
3. Press down the locking lever to
clamp the fence in position.
