6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7. Never touch the blade immediately after use, when changing the blade
always allow time for it to cool.
8. Never use damaged blades. (Replacement blades are available from your
Clarke dealer.
9. Replace table insert if the slot has become enlarged.
10. When cutting wood, ensure all nails or fastenings have been removed
beforehand. Nails will damage the saw blade.
11. When cutting round timber stock, use a suitable jig or fixture to keep the
work from turning.
12. Always ensure the blade is fully tightened and correctly adjusted before
use.
13. Keep the mains cable well away from the machine and ensure an
adequate electrical supply is close at hand so that the operation is not
restricted by the length of the cable.
14. Switch the machine off as soon as the task is completed.
SAFETY SYMBOLS
The following safety symbols may be found on the machine.
Wear a dust mask
Wear eye protection
Read instruction manual before use
