9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
KEY FOR CHUCK
OPERATION
OPERATING THE AIR DRILL
1. Squeeze the trigger to start the
drill.
2. Release the trigger to stop the drill.
3. To change the direction of rotation
move the lever behind the trigger
from F to R.
4. Always ensure the drill has stopped
before putting it down.
DISCONNECTING THE AIR SUPPLY
Do not disconnect the air supply hose until the air supply has been shut down
and the compressed air released.
1. Refer to the compressor instruction manual for the procedure to shut down
and release the compressed air.
2. Once the pressure has been released, disconnect the air supply hose from
the air drill.
Store the tool safely in its box in a dry, secure environment.
MAINTENANCE
DAILY
1. Before use, drain water from the compressed air supply.
2. Pour a few drops of CLARKE airline oil, into the air inlet. This should be
carried out regardless of whether or not an in-line mini oiler is used. If an
WARNING: MAKE SURE THAT THE DRILL IS DISCONNECTED FROM THE AIR
SUPPLY BEFORE STARTING ANY CLEANING, OR MAINTENANCE
PROCEDURES.
Summary of Contents for CAT60
Page 16: ......
