8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OPERATION
FITTING AN IMPACT SOCKET
1. Select the impact socket you
require, which must be in good
condition and fit the tool exactly.
2. Push the socket onto the square
drive shaft.
Only use the correct impact sockets.
SETTING THE DIRECTION AND SPEED
1. For normal tightening, the wrench
should be operated in the forward
(F) direction.
2. For loosening, the wrench should
be operated in the reverse (R)
direction.
3. To adjust the forward speed, turn
the switch until the desired output
is achieved. A click will be heard
at each of three positions.
• Setting 1 is the least amount of power while setting 3 is the most
powerful.
• The wrench operates at maximum power in reverse. This setting is for
releasing threaded fasteners.
NOTE:
Where the torque setting is critical, the final tightening must be by
hand using a calibrated torque wrench.
WARNING: NEVER USE STANDARD SOCKETS. THESE MAY SHATTER WITH
SERIOUS CONSEQUENCES. ONLY USE IMPACT SOCKETS DESIGNED FOR
USE WITH IMPACT TOOLS.
WARNING: WAIT UNTIL THE WRENCH HAS STOPPED ROTATING BEFORE
OPERATING THE FORWARD/REVERSE SWITCH.
Summary of Contents for CAT179
Page 16: ......