Clarke CAT161 Fitting & Maintenance Instructions Download Page 2

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE Filter/Regulator. This unit is designed to 
remove up to 95% of foreign matter greater than 5 micron in size from the 
airline and to set the delivery pressure accurately using the gauge.

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service. 

SPECIFICATION

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase. This guarantee is invalid if the product is found 
to have been abused or tampered with in any way, or not used for its 
intended purpose. Faulty goods should be returned to their place of 
purchase, no product can be returned to us without prior permission. 

This guarantee does not effect your statutory rights.

Model Number

CAT161

Max Supply Pressure

213 psi / 14.7 bar

Max Outlet Pressure

140 psi / 9.7 bar

Regulating Range

7-120 psi / 0.5-8.3 bar

Air throughput

40 cfm (1140 L / min) at max @ 90psi

Air Inlet/Outlet Size

1/2“BSP female

Dimensions (D x W x H)

115 x 70 x 254 mm

Pressure Gauge Range

0-150 psi / 0-10.3 bar

Filtration

5 um

Bowl Capacity

45 cm

2

Bowl Material

Polycarbonate

Ambient/Media Temperature

5-60

o

C

Summary of Contents for CAT161









Reviews: