2
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INTRODUCTION
Thank you for purchasing this CLARKE product.
Before attempting to use this product, please read this document thoroughly
and follow the instructions carefully. In doing so you will ensure the safety of
yourself and that of others around you, and you can look forward to your
purchase giving you long and satisfactory service.
INSTALLATION
The regulator should ideally be connected to a fixed airline or connected to
the outlet of the compressor. An arrow, moulded under the body of the unit,
indicates the direction in which the air should flow. Use the mounting bracket
supplied whenever possible.
The maximum supply pressure the unit can operate is 145psi (10bar).
IMPORTANT: Remember that the sequence for airline component assembly
is: FILTER/REGULATOR/LUBRICATOR.
ADJUSTING THE AIR PRESSURE
To adjust the delivery air pressure, pull the regulator cap upwards and twist
clockwise to increase/anti-clockwise to decrease the outlet pressure. The
outlet pressure is displayed by the gauge. When the pressure is correct, press
the cap back to lock and retain the setting.
Summary of Contents for CAT157
Page 4: ......
