12
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Your Clarke air tool has been designed to give long and trouble free service. If,
however, having followed the instructions in this booklet carefully, you
encounter problems, take the unit to your local Clarke dealer.
STORAGE
If the tool is to be stored, or is idle for longer than 24 hours, run a few drops of
Clarke air-line oil into the air inlet, and depress the trigger in order to lubricate
the internal parts. When not in use, disconnect from air supply, clean and store
in a safe, dry place.
ACCESSORIES
A wide range of airline accessories is available including filter/regulators,
lubricators, high-pressure hoses (5 to 50 metres) etc.
Contact your Clarke dealer or Clarke International Service Department for
further information.
SPECIFICATIONS
Please note that the details and specifications contained herein are correct at
the time of going to print. However CLARKE International reserve the right to
change specifications at any time without prior notice. Always consult the
machine’s data plate.
Model Number
CAT36B, CAT89 & CAT98
Tool Weight
0.6 kg
Collet Capacity
1/8” - 1/4”
Air Inlet Size
1/4“BSP (female)
Minimum Hose Size
5/16” (8mm) dia
Operating Pressure
90 psi (6.2 bar)
Air Consumption
8 cfm average
No Load Speed
22000 rpm @ 90psi
Sound Pressure Level (LpA dB)
92 dB(A)
Sound Power Level (LwA dB)
105 dB(A)
Vibration Levels
2.08 m/s
2
Summary of Contents for CAT 89
Page 16: ......