11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
BEFORE USE
FITTING / ADJUSTING THE DISC GUARD
1. Slide the disc guard into place as
shown.
2. Rotate the disc guard to the
required position and secure by
tightening the cap head screw
using the hexagonal key supplied.
3. Ensure the disc guard is securely fitted before using the grinder.
WARNING: MAKE SURE THAT THE ANGLE GRINDER IS SWITCHED OFF AND
UNPLUGGED FROM THE MAINS SUPPLY BEFORE FITTING OR REMOVING
ANY ACCESSORIES. ENSURE THE CORRECT GUARD IS FITTED FOR THE DISC
BEING USED.
WARNING: THE DISC GUARD SHOULD BE FITTED SO THAT IT PROVIDES
MAXIMUM PROTECTION TO THE USER WHEN IN THE WORKING POSITION.
