11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
RELEASING/LOCKING THE SAW HEAD
RELEASING
1. Press down slightly on the operating handle.
•
Pull out the head locking pin to release the arm for cutting and twist it 90
o
to remain locked in the ‘out’ position.
LOCKING
2. Press down on the head while
pushing the guard release to the
side to release the safety catch
and lower the head.
3. Twist the head locking pin through
90
o
and push back in to secure
the head for lifting.
4. Gently release the downward
pressure on the operating handle
and allow the head to rise.
DUST EXTRACTION
This machine is provided with a dust
extraction port for connection to a
dust bag (supplied).
1. Place the dust bag over the dust
extraction port using the clip on
the neck of the dust bag.
2. Make sure the zipper on the dust
bag is closed.
3. The dust extraction port may
alternatively be connected to a
suitable extraction system using the appropriate hose (not supplied).
• The hose must have an inside diameter of 43 mm.
Summary of Contents for C2MS210MP
Page 24: ......
