Clarke BIP1500 Operation & Maintenance Instructions Manual Download Page 2

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this Clarke Water Pump.

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

DESCRIPTION

This non-submersible centrifugal pump is designed to pump clean water in 
gardens for spraying and irrigation purposes and for pumping water to 
greenhouses. It can also be used for boosting running water feed pressure (not 
drinking water) or for pumping out wells or ponds. Operating with 
contaminated or salt water should be avoided.    

Your CLARKE water pump has been designed to give long and trouble free 
service. If, however, having followed the instructions in this booklet carefully, 
you encounter problems, take the unit to your local Clarke dealer.

Please keep these instructions in a safe place for future reference.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase. 

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission. 

This guarantee does not effect your statutory rights.

WARNING: THIS SYMBOL IS USED THROUGHOUT THE USER GUIDE 
WHENEVER THERE IS A RISK OF PERSONAL INJURY. ENSURE THAT 
THESE WARNINGS ARE READ AND UNDERSTOOD AT ALL TIMES.

Summary of Contents for BIP1500

















Reviews: