- 4 -
12. Before charging ensure the battery terminals are clean and that the cells are filled
with electrolyte to the correct level by adding distilled water where necessary.
13. Where appropriate we recommend that the vehicles’ positive (+) lead to the battery is
disconnected on the prior to charging.
ELECTRICAL CONNECTIONS
This equipment MUST be connected to a 3 phase supply, through a suitable plug. If connection
is done through an isolator, it is recommended that you consult a qualified electrician.
Under no circumstances must this equipment be connected to a standard 230 Volt, 1 phase
supply i.e., through a 13 Amp plug.
IMPORTANT
: The wires in the mains lead are coloured in accordance with the
following code:
Green & Yellow - Earth
Blue - Line
Brown - Line
3 PHASES
Black - Line
1.
Timer Control Knob
2.
Green Pilot Light - Timer
3.
Ammeter
4.
Line Voltage Lamp
5.
Voltmeter
6.
Charging Controller
7.
Voltage Selector Switch
8.
Current Controller
9.
Positive and Negative Lead
10. Power Input
1
2
3
4
5
6
7
8
9
10
FIG. 1