manualshive.com logo in svg

Clarke APK900, Operating & Maintenance Instructions

Share
Download
Clarke APK900 Operating & Maintenance Instructions Download Page 4

4

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]

GENERAL SAFETY PRECAUTIONS

WORK AREA

1.

Keep the work area clean and well lit. 

Cluttered and dark areas invite

accidents.

2.

Do not operate power operated tools in explosive atmospheres such as in
the presence of flammable liquids, gasses or dust.

 Power operated tools

can create sparks which may ignite dust or fumes.

3.

Keep children and bystanders away while working

. Distractions can cause

you to lose control.

ELECTRICAL SAFETY

1.

Power operated tools must match the power outlet. Never modify the plug
in any way. Do not use adaptor plugs with earthed (grounded) power
tools.

 Correct plugs and outlets will reduce the risk of electric shock.

2.

Do not expose tools to rain or wet conditions.

 Any water entering power

operated tools will increase the risk of electric shock.

3.

Do not abuse the electrical cable. Never use the cable for pulling or
unplugging the machine. Keep the cable away from sources of heat, oil,
sharp edges or moving parts

. Damaged or tangled cables increase the

risk of electric shock.

4.

When operating a power operated tool outdoors, use an extension cable
suitable for outdoor use. 

Using the correct cable reduces the risk of

electric shock.

PERSONAL SAFETY

1.

Stay alert, watch what you are doing and use common sense when you
are operating a power operated tool. 

 Do not operate when you are tired,

ill or under the influence of alcohol, drugs or medication.

2.

Wear personal protective equipment including eye protection. 

Safety

equipment such as a face mask, non-skid shoes or hearing protection
used for appropriate conditions will reduce personal injuries. Use a face or
dust mask if necessary. Wear ear protectors/defenders as the noise level
of this machine can exceed 85dB (A).

3.

Do not over-reach. 

Keep your proper footing and balance at all times. This

enables better control in unexpected situations.

4.

Avoid accidental starting of the machine. 

Ensure the switch is in the off

position and the locking button disengaged before plugging the machine
in to the power supply. Carrying power operated tools around with your
finger on the trigger or plugging in power tools that are switched on invites
accidents.

Summary of Contents for APK900





















Reviews:

No comments

Brands by name

Popular brands

Load more brands