11
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
ADJUSTMENTS
SPRAY PATTERN
Adjust the spray gun by rotating the nozzle and setting the tabs on the air cap
as shown. Three different spray settings can be chosen, depending on the
application and target object.
A)
Flat, narrow jet (for horizontal surfaces)
B)
Tall, narrow jet (for vertical surfaces)
C)
Circular jet (for corners, edges and hard to reach areas)
A) horizontal flat jet
B) vertical flat jet
C) tabs back
•
Note that both tabs must be adjusted as a pair.
SPRAY VOLUME
1
.
In order to achieve consistent and repeatable spray output, adjust the
spray volume by turning the trigger stop regulator on the rear of the spray
gun as shown in Fig 4.
•
Turn as shown;
+
to increase
the volume of material and
-
to reduce.
•
Adjustment of the regulator will
also affect the pattern. A poor
spray pattern will concentrate
the paint in the centre of the
spray and give a blotchy finish.
A good spray pattern will give
even distribution of paint
across the pattern.
2. Aim the spray gun at a piece of scrap material and operate the trigger
until paint is spraying. Adjust the regulator until the required volume of
paint is spraying.
Fig 3
Fig 4
Summary of Contents for APK900
Page 20: ......
