17
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
MAINTENANCE
CLEANING
Regularly clean the body of the appliance to prevent dust from collecting.
1. Wipe away dust with a soft dry cloth from the body and air inlet area of the
appliance.
IMPORTANT: Never immerse the appliance in water or any other liquid.
Never use aggressive or flammable cleaning agents such as bleach or
alcohol to clean any part of the appliance.
IMPORTANT: Only the pre-filter is washable. The other filters should be
replaced if heavily contaminated or indicated by the machine.
PRE-FILTER
1. If the pre-filter is very dirty, use a soft brush to brush away the dust while it is
dry. You can alternatively remove the dust with a vacuum cleaner.
2. Remove the pre-filter as shown on page 10 & wash under a running tap.
3. Air-dry the pre-filter and make sure it is completely dry.
4
4. Re-fit the pre-filter into the appliance.
AIR QUALITY SENSOR
Clean the air quality sensor every 2 months for optimum functioning of the
appliance. Clean it more frequently if you use the appliance in a dusty
environment.
NOTE:
When the humidity level in the room is very high, it is possible that
condensation can develop on the air quality sensor. As a result,
the AIR QUALITY light on the control panel may indicate that the
air quality is poor even though the air quality is good. In this case,
it is necessary to clean the air quality sensor.
1. Remove the air quality sensor cover.
2. Clean the air quality sensor, the air inlet and air outlet with a lightly
moistened cotton swab.
3. Dry them with a dry cotton swab.
4. Reattach the air quality sensor cover.
WARNING: ALWAYS UNPLUG THE APPLIANCE BEFORE PERFORMING ANY
CLEANING OR MAINTENANCE OPERATIONS.