16
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ADJUSTING THE AIR QUALITY SENSOR SENSITIVITY
The appliance allows you to adjust the sensitivity of the air quality sensor for
the benefit of people with allergies or asthma. When it is set to a higher
sensitivity level, the appliance starts cleaning the air at lower pollution levels to
make the air cleaner. There are four sensitivity levels:
• Common
• Standard
• Sensitive
• Extra Sensitive
The pollution sensor is set to ‘standard’ sensitivity but you can adjust the
sensitivity of the air quality sensor in the following way:
1. If the appliance is already plugged in, unplug and wait for a few minutes.
before plugging back in.
2. In STANDBY mode, press AIR-Q HIGH-SPEED buttons. After the
buzzer sounds twice, the air quality sensor sensitivity has been set to
extra
sensitive
. This should be indicated by the corresponding indicator flashing
five times and confirmed immediately after pressing the power button to
turn on the appliance.
3. In STANDBY mode, press AIR-MID-SPEED buttons. After the buzzer
sounds twice, the air quality sensor sensitivity has been set to
sensitive
level.
4. In STANDBY mode, press AIR-LOW-SPEED buttons. After the buzzer
sounds twice, the air quality sensor sensitivity has been set to
standard
level.
5. In STANDBY mode, press AIR-SILENCE buttons. After the buzzer
sounds twice, the air quality sensor sensitivity has been set to
common
level.
• The sensitivity level can be confirmed by the corresponding indicator
flashing five times immediately after pressing the power button to turn
on the appliance.
NOTE:
The appliance automatically starts operating at the pre-set
sensitivity level when switched on again.
SENSITIVITY SETTING INQUIRY
In STANDBY mode, press the air quality indicator button to check the sensor
sensitivity setting. Exit after the corresponding sensitivity indicate light flashes
five times or exit by pressing other buttons (except for the reset button).