background image

9

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

NOTE: 

The unit will default to the last tyre pressure set. You can then 

adjust this using the ‘-’ or ‘+’ buttons.

3. Press the Power Switch to 'ON'.

4. The tyre inflator will now inflate your tyre to the pre-set pressure and switch 

off automatically when the pressure is reached. Towards final inflation, the 
tyre pressure display reading will be slightly higher than the selected 
pressure. When the tyre inflator stops, the final reading will be the selected 
pressure. This is a normal function of the unit.

5. Switch OFF the tyre inflator and remove the tyre valve connector from the 

tyre valve, returning the hose to its storage position.

IMPORTANT: The ‘-’ or ‘+’ buttons should never be pressed while the tyre 
inflator is running.

If you leave the tyre inflator connected to the 12V supply but do not inflate the 
tyre, after a few minutes the Digital Display will switch off. To turn back on, 
press the Pressure Format Select Button.

When inflating tyres with normal “Schrader” valves, no adaptors need to 
be fitted to the hose.

Presta valves require the adaptor to be screwed onto the valve before 
attaching the hose.

6. Avoid inflating the objects above the recommended inflation pressure. This 

could lead to damage and /or injuries.

MAINTENANCE

Keep the tyre inflator free of dirt and dust as far as possible. Wipe with a clean 
cloth or blow it down with compressed air at low pressure. Do not use cleaning 
agents or solvents as these may be aggressive to the plastic parts. Ensure that 
no water can get into the interior of the tyre inflator

Your CLARKE tyre inflator has been designed to give long and trouble free 
service. If, however, having followed the instructions in this booklet carefully, 
you encounter problems, take the tyre inflator to your local CLARKE dealer.

The car adaptor incorporates a 15A fuse which can be replaced by 
unscrewing the end of the plug. 

Store the tyre inflator in a dry location.

Summary of Contents for 7640300













Reviews: