8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
•
When not in use, adaptors provided with the tyre inflator can be clipped to
the storage area on the top of the tyre inflator.
TYRE INFLATION
1. Fix the tyre valve connector onto
the vehicle tyre valve, ensuring
the valve is clean.
•
When connected correctly, the
digital display will show the
current pressure in the tyre. If this is
the correct tyre pressure as stated
in your vehicle handbook, remove
the valve connector.
2. If the tyre is below the
recommended pressure (as specified in your vehicle handbook), press
either the ‘-’ or ‘+’ pre-set button to adjust the pre-set value on the display
to the correct tyre pressure.
NOTE:
The unit will default to the last tyre pressure set. You can then
adjust this using the ‘-’ or ‘+’ buttons.
3. Press the Power Switch to 'ON'.
4. The tyre inflator will now inflate your tyre to the pre-set pressure and switch
off automatically when the pressure is reached. Towards final inflation, the
tyre pressure display reading will be slightly higher than the selected
pressure. When the compressor stops, the final reading will be the selected
pressure. This is a normal function of the unit.
5. Switch OFF the tyre inflator and remove the tyre valve connector from the
tyre valve, returning the hose to its storage position.
WARNING: THE HOSE MAY BE HOT AFTER USE. REMOVE CAREFULLY.
WARNING: IMPROPERLY ATTACHED HOSES OR ACCESSORIES CAN
BECOME DETACHED UNDER PRESSURE AND CAUSE SERIOUS INJURY.
WARNING: POSSIBLE AIR LEAKS CAN CAUSE FAULTY PRESSURE READINGS.
MAKE SURE ALL CONNECTIONS ARE TIGHTLY SECURED.
WARNING: THE GAUGE IS ONLY TO BE USED AS A REFERENCE, ALWAYS
CARRY OUT A FINAL PRESSURE CHECK WITH A GAUGE CONFORMING TO
BS EN 12645
Summary of Contents for 7640295
Page 12: ......
