7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
•
The manufacturer set pressure is 30 PSI and this compressor has a
memory function. The gauge will indicate units of measurement and
measured value.
4. Press the "SET" button to choose
the desired unit (PSI, BAR, KPA, kg/
cm
2
).
5. Press "-" or "+" button to choose
the desired value. Press and hold
"-"
or "+" button will accelerate
numerical change. After the
screen flashes three times, it will
show "0" and the system will enter
the chosen unit.
6. Press the tyre inflator's On/Off
trigger switch to start and hold this
button for continuous working.
•
The built-in LED light will be lit
during inflation.
•
For continuous inflation you can
push the switch lock upwards to
lock while the On/Off trigger is
depressed. In this way, inflation
continues without pressing any
button. To stop, simply squeeze
the trigger to release the locking
switch.
•
When the desired pressure is
reached, the tyre inflator will
stop working as it has pre-set
function. When the desired the pressure is reached, the reading may
have a +/- 1.5 psi difference. (This is normal)
•
Note that the tyre inflator has a 10 mins running/10 mins resting duty cycle.
7. After use, loosen the hose and remove from the tyre inflator
Summary of Contents for 7640295
Page 12: ......
