6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
10. Ensure that the axle stands cannot move when supporting the load and
are on firm, level ground. Use suitable wheel chocks to stop the vehicle
from moving.
11. The jack may move slightly during operation. It is important therefore, that
the floor is clean and completely free from debris.
12. Do not lift the vehicle if there is any chance of spillage of fuel, battery acid
or other liquids.
13. Carefully lower the vehicle onto the axle stand(s), checking constantly that
the vehicle rests snugly and cleanly on the axle stand and that the stand is
stable before the weight is taken.
NOTE:
Ensure this is carried out under complete control. DO NOT allow
the load to drop suddenly as this impose undue strain on the jack
internal parts and damage the vehicle.
14. Always avoid a rapid descent by turning the handle slowly.
15. Completely remove the jack from the vehicle.
SUITABLE AXLE STANDS FOR USE WITH THIS JACK
• CAX2TF 2 Tonne Folding Axle Stand (part no 7600015)
• CAX2TA 2 Tonne Aluminium Axle Stand (part no 7600010)
• CAX3TP 3 Tonne Axle Stand (part no 7600065)
• CAX3TBC 3 Tonne Axle Stand (part no 7600060)
• CAX3TA 1.5 Tonne Aluminium Axle Stand (part no 7600030)
• CAX6TP 6 Tonne Axle Stand (part no 7600076)
• CAX6TBC 6 Tonne Axle Stand (part no 7600070)
• CAX10TP 10 Tonne Axle Stand (part no 7600090)
-
sold singly
MAINTENANCE
CHECKING/TOPPING UP THE OIL LEVEL
If the jack has been stored for long periods, check for oil leaks before use. If
necessary, check the oil level as follows:
1. Ensure the jack is fully lowered by turning the control valve fully anti-
clockwise.
2. Remove the four retaining screws and lift off the cover plate.
Summary of Contents for 7621803
Page 12: ......
