Clarke 7610148, Operation & Maintenance Instructions Manual

Page: 5 / 16

5
BEFORE USE
UNPACKING
Obtain the assistance of a second person when unpacking the lifting table
from its packaging. Alternatively, cut and fold down one end of the box and
wheel the lifting table out.
ASSEMBLY
Lower the handle into the holes in the frame and secure each side from below
with the bolt (64), spring, and flat washers (63 & 62), provided.
Insert the foot operating lever (59) into its socket at the end of the connecting
bar (60). Insert the bolt (42) and secure with washers (6 & 11) and nut (12).
PURGING AIR BUBBLES
During shipment, air bubbles can occur in the hydraulic system which may
cause the ram to feel “spongy” and it may not achieve its maximum lift.
1. Hold the release lever and pump the operating lever several times to
purge any air from the hydraulic system.
2. Pump the operating lever to raise the table fully, then pull the release lever
to lower the table and check that it descends to its lowest position.
The lifting table is now ready to use.