background image

5

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

ELECTRICAL CONNECTIONS

Before switching the product on, make sure that the voltage of your electricity 
supply is the same as that indicated on the rating plate. Connecting it to any 
other power source may cause damage.

If it is necessary to change the fuse in the plug, the fuse cover must be refitted. 
If the fuse cover becomes lost or damaged, the plug must not be used until a 
suitable replacement is obtained.

If the plug has to be changed due to damage, a replacement should be 
fitted, following the wiring instructions shown below. The old plug must be 
disposed of as insertion into a mains socket could cause an electrical hazard.

If the colours of the wires in the power cable of this product do not correspond 
with the markings on the terminals of your plug, proceed as follows.

• The wire which is 

coloured 

Blue

 must be 

connected to the 
terminal which is 
marked 

N

 or coloured 

Black

.

• The wire which is 

coloured 

Brown

 must 

be connected to the 
terminal which is 
marked 

L

 or coloured 

Red

.

We strongly recommend that this machine is connected to the mains supply via 
a Residual Current Device (RCD) that will interrupt the supply if the leakage 
current to earth exceeds 30 rnA for 30 ms 

If in any doubt, consult a qualified electrician. DO NOT attempt any repairs 
yourself.

This symbol indicates that this is a Class II product, and does not 
require an earth connection.

WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS 
THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS 
SUPPLY.

WARNING: THE WIRES IN THE POWER CABLE OF THIS PRODUCT ARE 
COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:
BLUE = NEUTRAL      BROWN = LIVE

Plug must be BS1363/A approved.

Always fit 

Ensure that the outer sheath of 

Neutral

(Blue)

Live

(Brown)

 

a 13 Amp 

the cable is firmly held by the clamp

fuse.

Summary of Contents for 7336005

















Reviews: