background image

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE Power Washer.

This pressure washer is designed for cleaning machines, vehicles, buildings, 
boats, facades, terraces, gardening tools, etc. by means of a high-pressure 
water jet (if necessary, with additional cleaning agents).

Only use accessories, replacement parts and cleaning agents recommended 
by Clarke international.

Before attempting to use this product, please read this manual thoroughly.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission.

This guarantee does not effect your statutory rights.

LIST OF CONTENTS

The following items should be supplied in the carton. If any parts are missing or 
damaged, please see your Clarke dealer where you purchased the machine

1 X Pressure Washer 

1 X Detergent Bottle

1 X Gun Assembly

1 X Pair Of Storage Brackets

1 X Lance Assembly (With Integral High 
Pressure Nozzle)

1 X Manual

1 X High Pressure (Outlet) Hose

1 Hose Inlet Adaptor (Fitted)

Summary of Contents for 7336005

















Reviews: