background image

3

GENERAL SAFETY RULES 

1.

NEVER 

direct the spray towards any person or animal.

2.

NEVER 

direct the spray towards electrical wiring or equipment.

3.

NEVER 

hold your finger over the high pressure nozzle.

4.

NEVER 

allow children or untrained personnel to use this machine.

5.

NEVER 

operate the machine with any of the covers removed.

6.

NEVER 

attempt any repairs to this machine. Always refer to your Clarke dealer.

7.

NEVER 

supply any liquid other than water to the water inlet.

8.

NEVER 

use the detergent bottle to introduce solvents, e.g. paint thinners, petrol, oil 

as there is a risk of explosion 

9.

ALWAYS

 release any residual pressure in the system by turning off the water supply 

and operating the trigger before disconnecting any hose or accessory. 

10.

ALWAYS 

keep the machine itself dry and well clear of water spray.

11.

ALWAYS

 wear protective clothing and safety glasses. Loose particles and other 

debris may be propelled at high speed by the water jet.

12.

ALWAYS

 grip the gun firmly before pressing the trigger, expect the gun to ‘kick’ when 

starting.

13.

ALWAYS

 respect the requirements of the local water company. Power washers may 

only be connected to the mains drinking water supply, if a backflow preventer valve 
is installed in the supply hose.

14.

ALWAYS 

disconnect from the water supply, and ensure the system is completely 

drained when not in use. Store in a cool dry location.

15. When using the chemical injection facility, use only the chemical cleaning agents 

(detergents), that are approved for power washers. CLARKE Traffic Film Remover or 
CLARKE Wash and WAX (available from your dealer), is recommended. 

16.

WARNING

 High pressure jets can be dangerous if subject to misuse. The jet must not 

be directed at persons or anything that they are wearing.

17.

NEVER

 direct the jet at live electrical equipment or the machine itself.

18.

WARNING

 High pressure hoses, fittings and couplings are important for the safety of 

the machine. Use only hoses, fittings and couplings recommended by the 
manufacturer.

19.

WARNING

 Water that has flown through backflow preventers is considered to be 

non-potable. 

20.

WARNING

 If an extension cord is used, the plug and socket must be of watertight 

construction. Inadequate extension cords can be dangerous.

WARNING: Water at high pressure can be dangerous and can cause 
damage to persons or property if the operator is careless. Never allow 
anyone to operate this equipment unless they are familiar with the 
safety precautions.

Summary of Contents for 7333220





















Reviews: