16
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
WATER BUTT CONNECTION
This machine has the ability to draw its own water, meaning you can use water
not under pressure such as rainwater collected in a water butt.
To do this you must carry out the following procedure.
1. Remove the quick connector
from the water inlet.
2. Attach the filter to the end of the
suction pipe supplied.
3. Connect other end of the suction
pipe to the pressure washer.
4. Fill the supplied bottle with water.
5. Connect the hose from the bottle
to the self-suction valve shown.
6. Start the pressure washer See
Summary of Contents for 7320201
Page 28: ......