12
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SHUTTING DOWN
1. Set all switches to OFF and remove the mains plug from the power supply.
2. Squeeze the trigger on the gun assembly to remove any pressure in the
hose.
3. Turn off and disconnect the water supply hose and allow it to drain fully.
4. Disconnect the high pressure hose and allow it to drain fully.
USING DETERGENTS
Only use detergents recommended for use with pressure washers such as:
• CLARKE Traffic Film Remover which is a powerful ‘low foaming’ agent for
car cleaning, patio cleaning etc.
• CLARKE Wash & Wax.
1. Remove the detergent filler cap.
2. Fill the tank with detergent.
• Maximum 2.5 litres.
3. Replace the filler cap securely.
CONSUMABLES ETC
A range of suitable hoses, shampoo
and traffic film remover are available
from your CLARKE dealer.
WARNING: THE USE OF UNSUITABLE CLEANING AGENTS MAY ADVERSELY
AFFECT THE SAFETY OF THE MACHINE. DO NOT EXCEED THE CORRECT
OPERATING TEMPERATURE FOR THE DETERGENT IN USE.
Summary of Contents for 7320176
Page 20: ......
