9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
GUN ASSEMBLY SAFETY LOCK
The safety button on the gun is not there to lock the lever during operation,
but to prevent its accidental operation.
1. Lift the locking lever to the
position shown to prevent the
trigger from being pulled.
2. Fold the locking lever flat to
release the trigger lock.
AUTOMATIC STOP SYSTEM
The Automatic Stop System stops the machine during the bypass mode.
The Automatic Stop System will stop the machine and will restart it
automatically when the trigger is pulled.
• It is advisable to activate the safety lock on the gun assembly whenever
the machine is not being used in order to avoid unintentional starting.
• If the machine starts automatically without pressing the gun trigger this
will be attributable to air bubbles in the water or other similar
phenomena and does not imply the existence of any defects in the
machine.
• Do not leave the machine
unattended.
If you do not intend to used the
machine for more than 5 minutes, set
the ON/OFF switch to OFF.
Summary of Contents for 7320176
Page 20: ......
