6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OVERVIEW
SUITABILITY
The CLARKE range of submersible pumps are suitable for discharging pools,
ponds, fountains, pits and any waste water drainage. They can handle foul
water containing suspended material as listed in the specification. The pumps
are not suitable for handling inflammable, corrosive, explosive or dangerous
liquids.
THE FLOAT SWITCH
The float switch enables the pump to stop and restart automatically as the
surrounding water level changes. As the water level rises, the switch will float
and start the pump. As the water level falls, so will the float switch, until it stops
the pump. Float switches are factory set to provide the correct ON-OFF
switching mode. This makes them suitable for permanent or semi-permanent
installations, eg. installations where it is necessary to maintain water at a
particular level without an operator in attendance.
THE THERMAL CUT-OUT
The pump is provided with a thermal overload cut-out, so that in the event
that the pump becomes overheated (due to becoming blocked etc) it will
shut off automatically. When the blockage has been cleared, the thermal
cutout will cool down and re-set and the pump can be re-started.
Summary of Contents for 7236042
Page 20: ......