6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INSTALL THE DISCHARGE HOSE
1. Put the rubber washer into the
adaptor.
• Make sure that it is seated
correctly.
2. Screw the adaptor onto the
pump.
• PTFE tape can be used to
ensure a good seal.
3. Slide the hose on to the adaptor
and lock in position with the hose
clip supplied.
• 2" Reinforced Hose is available
from your Clarke supplier (Part
number - 7955020)
• 2" Lay Flat Hose is available
from your Clarke supplier (Part
number - 7955160)
Summary of Contents for 7230170
Page 36: ......