4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
GENERAL SAFETY PRECAUTIONS
Before using this equipment it is in your own interest to read and pay attention
to the following safety rules.
1.
NEVER
use for pumping flammable liquids or corrosive chemicals. This
pump is designed to pump clean water only.
2.
ALWAYS
keep the working area clean and well lit. Floors should always be
kept clear. Cluttered or dark areas invite accidents.
3.
NEVER
over-reach. Keep your proper footing and balance at all times
when installing or maintaining the pump.
4.
NEVER
direct any water discharge towards electrical wiring or equipment.
5.
ALWAYS
thoroughly familiarise yourself with this pump & its operation, and
follow all instructions in this manual.
Never allow persons unfamiliar with
these instructions to instal or operate the pump.
6.
ALWAYS
ensure that the pump is properly installed to prevent it from moving
during operation, and that the immediate area surrounding the pump is
kept clear.
7.
ALWAYS
maintain the pump with care and keep it clean for best / safest
performance.
8.
NEVER
use this product if any part is damaged. Have it inspected and
repaired by your local Clarke dealer. Always turn the pump off before
carrying out any maintenance.
9.
NEVER
modify this pump in any way. Use it ONLY for the purpose for which it
is designed.
10.
ALWAYS
have the pump serviced by your local Clarke dealer, using only
identical replacement parts. This will ensure the safety of the pump is
maintained. The use of non standard parts could be hazardous.
11.
NEVER
allow the pump to run dry.
WARNING: ALWAYS CONNECT THE PUMP TO AN EARTHED POWER SUPPLY
VIA AN RCD.
CAUTION: THIS PUMP IS NOT A SUBMERSIBLE PUMP. ON NO ACCOUNT
SHOULD IT EVER BE IMMERSED IN WATER.
Summary of Contents for 7120310
Page 16: ......