5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
2.
DO NOT
switch the buffer/polisher on whilst the wheel is in contact with the
workpiece.
3. Avoid polishing dissimilar metals with the same buffing wheel; galvanic
corrosion may occur.
4.
DO NOT
touch the workpiece immediately after polishing as it may be very
hot.
5.
DO NOT
touch the buffing wheel whilst operating or whilst plugged into the
mains power.
6.
DO NOT
leave the buffer/polisher running unattended.
7.
DO NOT
operate the buffer/polisher when you are tired or under the
influence of alcohol, drugs or intoxicating medication.
8. When not in use, switch the buffer/polisher off and remove the plug from the
power supply.
SAFETY SYMBOLS
The above safety symbols are displayed on the machine.
Read the manual
and safety
instructions before
use
Eye protection
should be worn
Ear protection
should be worn
Dust mask should be
worn
HAZARD, Motor
gets hot
Summary of Contents for 6500485
Page 12: ......
