background image

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE Impact Wrench. 

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission. This guarantee does not effect your 
statutory rights.

ENVIRONMENTAL PROTECTION

Do not dispose of this product with general household waste. All 
tools, accessories and packaging should be sorted, taken to a 
recycling centre and disposed of according to the laws governing 
Waste Electrical and Electronic Equipment.

Through the purchase of this product, the customer is taking on the obligation 
to deal with the WEEE in accordance with the WEEE regulations in relation to 
the treatment, recycling & recovery and environmentally sound disposal of 
the WEEE. In effect, this means that this product must not be disposed of with 
general household waste. It must be disposed of according to the laws 
governing Waste Electrical and Electronic Equipment (WEEE) at a recognised 
disposal facility.

BATTERY DISPOSAL

Dispose of old batteries in accordance with local authority regulations. Do not 
incinerate or crush, as this will increase the risk of explosion and 
contamination. If the battery contents come into contact with skin or the eyes, 
rinse with clean water for several minutes and seek medical advice 
immediately afterwards.

Summary of Contents for 6487070

















Reviews: