4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
16.
Stay alert. -
Watch what you are doing. Use common sense. Do not operate tool
when you are tired.
17.
Check damaged parts. -
A guard or other part that is damaged should be properly
repaired or replaced by an authorized service centre unless otherwise indicated in
this instruction manual. Have defective parts replaced by an authorised service
facility.
18.
Warning. -
The use of any accessory or attachment, other than those recommended
in this instruction manual, may present a risk of personal injury.
19.
Have your tool repaired by a qualified person. -
This electric tool is in accordance
with the relevant safety requirements. Repairs should only be carried out by qualified
persons using original spare parts, otherwise this may result in considerable danger to
the user.
CORDLESS TOOL USE AND CARE
1.
Ensure the trigger switch is not being pressed before inserting battery pack.
2.
Recharge only with the charger supplied by the manufacturer. A charger that is
suitable for one type of battery pack may create a risk of fire when used with
another.
3.
When the battery pack is not in use, keep it away from other metal objects like
paper clips, coins, keys, nails, screws, or other small metal objects that can make a
connection from one terminal to another. Shorting to battery terminals together may
cause burns or a fire.
4.
If damaged, corrosive liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation or burns.
5.
If the cable on the charger is damaged, it must be replaced by a service agent.
MACHINE SPECIFIC
1.
Secure the workpiece. A workpiece held with clamping devices or in a vice is held
more securely than by hand.
2.
Before any work on the machine itself (e.g. maintenance) as well as during transport
and storage, remove the battery from the power tool. There is danger of injury when
unintentionally actuating the trigger switch.
3.
Do not open the battery. Danger of short-circuit.
4.
Protect the battery against heat, e.g., also against continuous sun irradiation and
fire. There is danger of explosion.
5.
Do not short-circuit the battery. There is danger of explosion.
6.
Keep your fingers away from the stapler/nailer head. There is danger of injury when
unintentionally actuating the trigger switch.
7.
Never point the machine at persons or animals. Staples or nails shot from a short
distance can cause considerable injuries.
8.
Do not use the machine to fasten electrical wiring. Contact with electric wires can
lead to fire and electric shock.
Summary of Contents for 6487057
Page 12: ......