CONTROL PANEL
INDICATOR LIGHTS:
(1)
FULL Indicator
Illuminates when the water container is full. To empty
the water bucket, switch the unit off and unplug
from socket, carefully remove the bucket and empty
the collected water. Replace the bucket carefully
before switching unit back on.
(2)
DEFROST
If the ambient temperature is too low the unit will
automatically start to defrost and the light will
illuminate. The defrost lamp will also illuminate if the
air filter becomes clogged.
(3)
RUNNING
Illuminates when the dehumidifier is ON
(4)
Humidity Control
Turn the dial to OFF to stop the machine.
Turn the dial to CON for continuous dehumidification.
As a safety feature, the unit will run for three minutes before the compressor
starts.
OPERATION
NOTE:
This unit operates within an ambient temperature of 5°C to 35°C.
1.
Ensure that the unit is connected to the power socket.
2.
Make sure the water tank is correctly positioned. (If the Full lamp
illuminates when unit is first switched on, remove the tank and replace it)
3.
Turn the humidity control knob to the desired setting.
4.
The unit will shut down when the humidity control is set to OFF position.
SETUP AND OPERATION
3
1
2
4
