8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
FIG 3
6. Attach the collector, (23) to the
collector body as shown in Fig 4,
using 6 hex head screws and
washers, (supplied), (DO NOT
OVERTIGHTEN). Ensure the gasket,
(22) is fitted between the two units.
FIG 4
7. Attach the two bag support rods, (31)
using screws, nuts and washers supplied,
one on either side of the collector, (see Fig
5). It may be necessary to reposition the
motor to align the rods vertically etc.
Once the rods are in place and secured,
retighten the nuts and bolts securing the
motor to the motor plate.
FIG 5
Summary of Contents for 6470305
Page 16: ......