15
MAINTENANCE
CHANGING THE CARBON BRUSHES
1. Remove the screw holding the
brush cover in place.
2. Remove the worn brush.
3. Replace with the new brush
supplied.
4. Repeat on the other side of the
body.
• Both brushes must be replaced
at the same time
CLEANING
• To maintain the best possible performance from your angle grinder,
it must be kept clean.
• To reduce fire hazard, keep the cooling vents free of debris.
• Clean the area around the spindle and mounting washer and keep
the threaded locking washer clean.
GENERAL MAINTENANCE
• Make sure that all nuts, bolts and screws are tight and secure.
• Check the secondary handle and the guard for damage.
• Always have any damaged, or worn parts repaired, or replaced.
• Always have your angle grinder inspected and maintained by
qualified service personnel. Do not attempt to repair the angle
grinder unless you are qualified to do so.
