9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
TO CLEAR A JAM IN THE NAILER/STAPLER
Do not pull the trigger until the jam has been cleared, as this could cause
serious damage:
1. Release the magazine catch and
slide the magazine open.
2. Remove all staples/nails from the
chamber.
3. Lower the clip on the front of the
yoke.
4. Lift the front of the yoke upwards.
5. Remove the jammed fastner,
using pliers if required.
6. Lower the front of the yoke and
reengage the clip to lock in
place.
7. Once the jammed fastener is
removed, reload and continue.
MAINTENANCE
• The stapler/nailer does not require any maintenance other then
keeping it free from any dirt or debris. This can be done using a
clean dry cloth and/or brush. Do not use solvent or alcohol based
cleaner as it could damage the casing.
• There are no user serviceable parts on the stapler/nailer. If there is a
problem please contact your nearest CLARKE dealer.
• Do not open the casing, the guarantee will be void if the casing has
been opened or if the stapler/nailer has been tampered with.
• The use of parts other than CLARKE replacement parts may result in
safely hazards, decreased tool performance and will invalidate your
warranty.
WARNING: SWITCH OFF THE STAPLER/NAILER AND REMOVE THE PLUG
FROM THE MAINS SUPPLY BEFORE CLEARING A JAM.
Summary of Contents for 6462562
Page 12: ......
