4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
periodically and replace, if damaged. Keep handles dry, clean and free
from oil and grease.
14.
Disconnect tools. -
When not in use, before servicing and when changing
accessories such as blades, bits and cutters.
15.
Avoid unintentional starting. -
Do not carry a tool with a finger on the
switch.
16.
Use outdoor extension leads. -
When tool is used outdoors, use only
extension cables intended for outdoor use.
17.
Stay alert. -
Watch what you are doing. Use common sense. Do not
operate tool when you are tired.
18.
Check damaged parts. -
A guard or other part that is damaged should be
properly repaired or replaced by an authorized service centre unless
otherwise indicated in this instruction manual. Have defective switches
replaced by an authorised service facility. Do not use the tool if the switch
does not turn it on and off.
19.
Warning. -
The use of any accessory or attachment, other than those
recommended in this instruction manual, may present a risk of personal
injury.
20.
Have your tool repaired by a qualified person. -
This electric tool is complies
with the relevant safety requirements. Repairs should only be carried out by
qualified persons using original spare parts, otherwise this may result in
considerable danger to the user.
MACHINE SPECIFIC
1. Secure the workpiece. A workpiece held with clamping devices or in a
vice is held more securely than by hand.
2. Before any work on the machine itself (e.g. maintenance) as well as during
transport and storage, switch the machine off and remove the plug from
the power supply.
3. Keep your fingers away from the stapler/nailer head. There is danger of
injury when unintentionally actuating the On/ Off switch.
4. Never point the machine at persons or animals. Staples or nails shot from a
short distance can cause considerable injuries.
5. Do not use the machine to fasten electrical wiring. Contact with electric
wires can lead to fire and electric shock.
Summary of Contents for 6462562
Page 12: ......
