8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
BEFORE USE
FITTING THE BLADE
1. Twist and hold the blade holder
open.
2. Insert the blade as far as possible
into the holder with the blade
teeth facing downwards.
3. Release the blade holder to lock
the blade in place.
• Check that the blade is secure
before use.
ROTATING THE HANDLE
1. Press down the handle release
button.
2. Twist the handle to the required
position.
3. Release the handle release
button.
WARNING: BEFORE REMOVING, OR INSTALLING A BLADE, MAKE SURE
THAT THE MAINS PLUG HAS BEEN REMOVED FROM THE MAINS SUPPLY.
CAUTION: THE RETRACTED BLADE LENGTH SHOULD BE LONGER THAN THE
WIDTH OF THE WORKPIECE. IF THE BLADE IS SHORTER, THE TIP WILL JAM IN
THE WORKPIECE DURING CUTTING, POSSIBLY CAUSING INJURY AND
DAMAGING THE BLADE OR WORKPIECE.
WARNING: DO NOT ADJUST THE HANDLE IF THE BLADE IS MOVING.
