21
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ADJUSTMENTS
CHECK AND ADJUST THE MITRE ANGLE
1. Lock the saw head in the down position see page 13.
2. Put a set square up against the
left side of the fence and blade.
3. Adjust the mitre arm if necessary
until the blade is perfectly square
to the fence.
4. If pointer does not point to zero on
the mitre scale, loosen the screw
that attaches the pointer and
move the pointer as necessary.
CHECK AND ADJUST THE BEVEL ANGLE
1. Loosen the bevel adjustment
handle.
2. Push the saw head to the right to
vertical and tighten the bevel
clamp handle.
3. Lock the saw head in the down
position see page 13.
Summary of Contents for 6461525
Page 32: ......
