12
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
BEFORE USE
1. Remove the saw from the packing material carefully.
• The following should be supplied. If anything is missing speak to your
CLARKE dealer.
BENCH MOUNTING
Holes are provided in all four feet to
facilitate bench mounting.
• Always mount your saw firmly
on a level surface to prevent
movement.
The saw can also be mounted to a
piece of 12.5 mm or thicker plywood
which can then be clamped to your
work surface.
• When mounting your saw to a
piece of plywood, make sure that the mounting screws do not protrude
from the bottom of the wood.
MITRE SAW STAND (
NOT SUPPLIED
)
You can also mount the machine to
a mitre saw stand available from your
local CLARKE dealer.
CUTS Mitre Saw Stand Part No
6500944.
1 x Cross-Cut Mitre Saw with Laser Guide
1 x Sawdust Bag
1 x Clamping Device (fitted).
1 x 6 mm Hex Key
2 x Workpiece Supports (fitted).
1 x 3 mm Hex Key
1 x Blade - 216 mm x 30 mm x 2.8 mm x
24 TCT (fitted)
1 x Blade - 216 mm x 30 mm x 2.8
mm x 48 TCT (in box).
Summary of Contents for 6461525
Page 32: ......
