11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OPERATION
DISPLAY BUTTON
Press the
DISPLAY
button until the following LED is lit:
1.
VOLTAGE/V
- When the charger is
NOT
charging a battery, the display will
show the battery voltage.
2.
BATTERY%
- When in charging, the digital display shows an estimated
charge percentage of the battery connected to the chargers battery
clamps.
3.
ALTERNATOR%
- The digital display shows an estimated output percentage
of the vehicles charging system connected to the chargers battery
clamps, compared to a properly functioning system.
FUNCTION BUTTON
1.
CHARGE
- Press & hold the
RATE SELECTION
button for 3 seconds to choose
battery type (STD/GEL/AGM) first, and press & hold the same button for 3
seconds until the digital display shows
OFF
. Then press the
RATE SELECTION
button once to choose the charging current. After that, press the
FUNCTION
button until the
CHARGING
LED is lit to enter this mode (digital
display shows
CHARGE-ON
).When in charging, the battery type cannot be
changed. To stop charging, press the
FUNCTION
button again and
CHARGE
LED will be off (digital display shows
CHARGE-OFF
).
2.
STATRT
- Your battery charger can be used to jump start your car if the
battery is low. Follow all safety instructions and precautions for charging
Summary of Contents for 6267019
Page 20: ......
